View cart

Rentals

We are Northern California's only fully certified McElroy distribution, service and rental center. Your crew can get the training they need in our fully equipped facility for Small Diameter, Medium Diameter and Large Diameter Fusion as well as Fusion Inspection. Learn more about training here. We have certified Master Mechanics on hand to repair any problem with your machine so it stays running like new. We have Fusion Techs that are available to assits with onsite fusing for both water and gas projects.

McElroy

2LC FUSION MACHINE 1/2" CTS - 2" IPS PIPE

The 2LC employs a semi-automatic locking cam (LC) system to maintain force during the cooling cycle. Download Spec Sheet

McElroy

14 PITBULL FUSION MACHINE 1"- 4" PIPE

The McElroy Pit Bull 14 is designed to butt fuse tees, ells and other fittings with consistent, high-quality results. Download Spec Sheet

McElroy

28 ROLLING FUSION MACHINE 2" - 8" PIPE

The Rolling 28 incorporates an interchangeable 4-jaw carriage that can be easily removed for in-ditch fusion. Download Spec Sheet

McElroy

412 ROLLING FUSION MACHINE 4" - 12" PIPE

The 412 can be ordered in gas or electric power, with a wheeled chassis that offers easy maneuvering on site. Download Spec Sheet

McElroy

618 ROLLING FUSION MACHINE 4" - 12" PIPE

McElroy 618 machines can fabricate segmented ells with optional mitered inserts and are DataLogger® compatible. Hydraulic clamping is available. Download Spec Sheet

McElroy

TRACSTAR 500 SERIES III FUSION MACHINE 6" - 20" PIPE

The TracStar 500 Series 3 adds additional productivity-enhancing features, such as indexer-mounted facer and heater that are powered by the machine, standard Hydraulic Clamping, dual pipe lifts, and economy engine throttle setting to conserve fuel. Download Spec Sheet

McElroy

TRACSTAR 630 FUSION MACHINE 8" IPS - 24"OD PIPE

McElroy’s TracStar 630 Series 2 is a self-propelled, all-terrain fusion machine capable of butt fusing pipe from 8” IPS to 24” OD (225mm to 630mm). Download Spec Sheet

McElroy

TRACSTAR 900 FUSION MACHINE 12" - 36" PIPE

The TracStar 900 is a self-contained, self-propelled, all-terrain fusion machine with an on-board generator for powering the heater. The carriage can be easily removed for in-ditch use. Download Spec Sheet

McElroy

TRACSTAR 1200 FUSION MACHINE 16" - 48" PIPE

The self-contained machine features an on-board generator for powering the heater and facer, which is now positioned between the fixed jaws for easier pipe transfer. Download Spec Sheet

McElroy

MEGAMC 1600 FUSION MACHINE 20" - 65" PIPE

The machine allows for butt fusion of most fittings without special holders or removal of the outer jaws and mitered inserts are available for fabricating ells. Download Spec Sheet

McElroy

MEGAMC 1648 FUSION MACHINE 16" - 48" PIPE

The Series 2 model has additional fusion force and is capable of in-ditch work with a removable 3- or 4-jaw carriage. Download Spec Sheet

McElroy

POLYGON 163MM - 160MM & 63MM TO 125MM

The Polygon is a multifaceted machine used to butt fuse joints and fabricate miter joints from zero- to 45-degree angles with additional socket fusion capability for polypropylene pipe. Download Spec Sheet

McElroy

SOCKET FUSION KIT 16MM - 125MM

These tools are designed specifically to socket fuse all major brands of polypropylene pipe and fittings. Download Spec Sheet

McElroy

SPIDER 125 SERIES 2 63MM - 125MM

The Spider is ideal for performing socket fusions overhead, vertically and other tight indoor spaces from the attic to the floor. Download Spec Sheet

McElroy

HORNET 20MM - 63MM

With a small footprint and weighing just 11 pounds, the Hornet is capable of performing in any orientation — making it ideal for overhead and vertical fusions in tight spaces. Download Spec Sheet

McElroy

SMARTFAB 125 20MM - 160MM

The Smartfab's portable design allows it to be positioned on any flat surface for precise prefabrication, providing versatility in the field as well as the shop. Download Spec Sheet

McElroy

ACROBAT 160 63MM - 160MM

The Acrobat 160 is a low-force fusion machine that allows operators to butt fuse pipe in tight work spaces. Download Spec Sheet

McElroy

ACROBAT 250 63MM - 250MM

The Acrobat 250 has a compact design for easy maneuvering in tight work spaces and is capable of fusing pipe on the ground, vertically and overhead. Download Spec Sheet

McElroy

618 ROLLING (GAS OR ELECTRIC) 200MM - 450MM

McElroy 618 machines can fabricate segmented ells with optional mitered inserts and are DataLogger® compatible. Hydraulic clamping is available. Download Spec Sheet

McElroy

TRACSTAR 618 SERIES II 200MM - 450MM

The Series 2 machines incorporate a new cowling design that aids in heat dissipation — while providing easier access for machine maintenance. Download Spec Sheet

McElroy

TRACSTAR 500 SERIES III 315MM - 500MM

Robust features include a strong hydraulic facer for fast and efficient facing of pipe ends. The onboard engine and generator powers both the hydraulics and heater. Download Spec Sheet

McElroy

Datalogger

The DataLogger is used to record and document key parameters of the fusion process to determine if a joint was fused with correct pressure and times according to supported standards. Heat soak times, heating pressure, open/close times, fusion time, fusion pressure and cool time are all recorded. The real-time fusion graph gives the operator immediate visual feedback and information regarding the integrity of each fusion joint.

DIGITAL PYROMETER

A Digital Pyrometer will measure the surface temperature of your heater plate.

DEBEADING

The Bead Trimmer 2 system has an adjustable cutter that is designed to operate in a range of pipe sizes. It is most productive to remove the fusion bead during the cooling stage of the Fusion Process.

ELECTRO FUSION

ELCTRO FUSION MACHINE

The Electro Fusion Machine is used to start the fusion process between your coupling and pipe.

SQUEEZE OFF TOOL

Squeeze Off Tools are used to clamp down a pipeline so repairs can be done to the damaged section with out shutting off the flow upstream and with out damage to the pipe.

HOLE SAWS

Hole saws are used drilling a hole into your pipe for an electro fusion tee to tap to.

DECHLORINATION

The feed tank maintains a constant level of CAPTOR by using a float valve. You can change out the 5-gallon drums without stopping your dechlorination run. Simply disconnect the empty drum of CAPTOR and replace it with a fresh one. The feed tank continues to feed CAPTOR while the change-out occurs.

DECHLORINATION

The LPD-250 is for use with chemically treated (4 ppm or less chlorine/chloramine) potable water.

HYDROSTATIC TEST PUMPS

These test pumps are used for pressure testing water systems

PORTABLE GENERATORS

Not all our machines have generators included with them, but we carry generators for all sizes.